Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateFast, Reliable Water Damage Restoration Across Selma
Water damage in a Selma home moves fast, and so do we. When a pipe bursts on Floral Avenue or a water heater lets go in a 1960s ranch off McCall Avenue, every hour of standing water pushes moisture deeper into drywall, subfloor, and framing. Our crews coordinate dispatch from the Fresno office and serve Selma locally, with a live person answering the phone 24/7 at (559) 354-1680. You’ll get a written price before any work starts, not after a crew is already inside your home.
Why Tidemark Water Damage Fresno Is Selma’s Preferred Water Damage Restoration Company
Selma homeowners call us because we understand what their houses are actually made of. Most homes here were built between the 1950s and 1970s: single-story ranch layouts on slab foundations, with stucco exteriors and composition shingle roofs. Those homes dry differently than newer construction, especially when summer temperatures climb past 100°F. Our technicians are IICRC-, RIA-, and IFA-credentialed, and they’ve worked enough Selma jobs to know that drying too aggressively in that heat warps framing and buckles baseboards. So we map moisture first, then dry to the reading, not the calendar.
Rick Sumner leads our team, and the standard he set is simple: shoe covers go on at the door, drop cloths cover the floor before the first piece of equipment comes in, and a photo of the clean-up is shared before the crew leaves. Every job carries the 365-Day Done Right Promise. If the restoration isn’t right, we make it right. Selma residents also get background-checked, uniformed technicians who explain what they’re doing before they do it, and who treat your home like it’s their own.
Restoration work we handle
Water Extraction in Selma
Water extraction in Selma means removing standing water from slab-adjacent flooring, tight hallways, and the low-clearance spaces where ranch homes hold moisture. In this city, that often means working around original construction quirks: narrow side yards, alley-load garages with limited clearance, and interior walls that hide decades-old plumbing. A typical water extraction job in Selma runs $500 to $1,800 depending on square footage and how far water traveled. You see the written number before we start.
Slab Home Extraction
Selma’s 1950s and 1960s ranch homes sit on concrete slabs, which means water doesn’t drain downward into a crawl space. It spreads horizontally under laminate, carpet, and vinyl. Our extraction teams use truck-mounted units and portable extractors to pull water from flooring and pad, then check moisture levels at the slab line before drying equipment goes in.
Pipe Burst Response
Original galvanized plumbing in older Selma neighborhoods corrodes in the hard local water, and winter freezes finish the job. When a supply line splits behind a stucco wall, we extract first and contain the affected area so contaminants don’t spread into carpeted bedrooms or living spaces.
Emergency Water Removal in Selma
Emergency water removal in Selma is the call you make when water is still flowing or standing. Whether it’s a failed water heater off Rose Avenue or a ceiling collapse from a roof leak near Selma High, we prioritize fast response because the first hours determine how much of your home can be saved. Emergency water removal in Selma typically runs $800 to $2,600 depending on the size of the affected area and whether structural drying is required. A live person answers the phone around the clock at (559) 354-1680.
Stop-the-Flow First Steps
Before anyone picks up a tool, we help you find the shutoff if you haven’t already. Then we document the damage with photos, map where water traveled, and give you a written scope of work. No work begins until you approve that number. For Selma homes with older plumbing, we often recommend a quick check of adjacent galvanized lines while the wall is already open.
Garage and Alley-Load Access
Selma’s alley-load garages create a specific problem: water pools in spaces with limited clearance and poor drainage. Our crews carry compact Dri-Eaz air movers that fit in tight clearances between a parked car and a wall. We can extract water from a garage without moving your car out when the driveway is blocked.
Trusted Brands We Service in Selma
We stock and service equipment from Water Damage Restoration brands Selma homeowners recognize: Dri-Eaz dehumidifiers, Phoenix air movers, and XPOWER extractors. These are professional-grade machines, not rental counter units. On Selma jobs, that matters because slab homes need precise humidity control during drying. We keep common parts on our trucks so a failed sensor or clogged filter doesn’t add a day to your drying timeline. We also use B-Air equipment where lower noise matters, like homes with nap schedules or young kids.
See the difference
Before
After
Before
After
Before
AfterCommon Water Damage Restoration Problems We See in Selma Homes
- Warped framing from overly aggressive drying. When summer temps exceed 100°F, drying too fast can warp studs and door frames in Selma’s older ranch homes. We use thermal imaging and moisture meters to dry to the reading, not a timer.
- Hidden moisture behind stucco. Stucco exteriors hide water intrusion for weeks. By the time a stain shows inside, moisture has usually spread behind the wall. We check the tide mark, the line water leaves on a wall, to find how far it actually traveled.
- Tule fog humidity extending dry times. Selma’s winter fog keeps ambient humidity high, which slows drying and can leave moisture trapped behind paneling if a crew stops too early. We track interior humidity and adjust dehumidifier settings accordingly.
- Corroded galvanized supply lines. Many Selma homes still run original galvanized plumbing. Hard water corrodes it from the inside, and a winter freeze turns a pinhole into a burst. We recommend inspecting adjacent lines when we’re already opening a wall.
Pricing for Water Damage Restoration in Selma, CA
Most water damage jobs in Selma fall between $500 and $2,600, with the final number driven by three things: how far water traveled, whether flooring or drywall needs removal, and how long structural drying takes. Water extraction alone is usually $500 to $1,800. Emergency water removal with drying equipment and monitoring runs $800 to $2,600. Selma’s slab construction can push costs toward the higher end because water spreads horizontally under flooring instead of draining into a crawl space. You’ll get a written price before any work begins, every time. Call (559) 354-1680 for a free estimate.
We Also Serve Cities Near Selma
Beyond Selma, our crews handle water damage in Selma and the surrounding communities: Fowler, Parlier, Kingsburg, and Reedley. If your home sits just outside city limits or along Highway 99, we still respond quickly. The same written-price standard and 365-Day Done Right Promise apply everywhere we work.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Water Damage Restoration in Selma
We use compact extraction wands and low-profile air movers that fit in the 18- to 24-inch gap between a Selma home’s exterior wall and the fence line. In a 1960s ranch on Young Street, our crew responded to a pipe burst in an alley-load garage where galvanized supply lines had corroded behind a stucco wall. We used thermal imaging for moisture mapping, set up Dri-Eaz air movers and a Phoenix dehumidifier in the narrow clearance, and applied antimicrobial treatment to the affected wall cavity before structural drying brought the slab-adjacent framing back to pre-loss condition. Call (559) 354-1680 and we’ll send a crew that fits your house, not a one-size-fits-all trailer.
Yes, and here’s why. Selma’s hard water leaves mineral deposits inside galvanized pipes that corrode over decades. When those pipes burst, the water carries rust particles and mineral sediment into wall cavities and flooring, which can complicate antimicrobial treatment. We apply an EPA-registered antimicrobial to affected surfaces and build in an extra moisture-check pass to confirm the cavity is dry before we close the wall. The treatment itself doesn’t change, but the verification step matters more in Selma homes with original plumbing. Call (559) 354-1680 for a written scope on your specific situation.
We don’t blast heat into the room and hope for the best. Selma’s extreme summer temperatures mean slab homes can dry too fast if a crew runs equipment at full output without monitoring. Our technicians take moisture readings at the slab line, the flooring surface, and the air, then adjust air mover and dehumidifier settings to keep drying controlled. For laminate and hardwood on slab, we often use drying mats in addition to air movement, which pulls moisture up through the flooring without cooking it. Call (559) 354-1680 to have us evaluate your floors.
We don’t guess. Selma’s Tule fog keeps outdoor humidity high, which pushes moisture back into drying materials if you stop equipment too early. Our crews use moisture meters and thermal imaging to compare the affected wall cavity against a dry reference point in the same room. We close the wall only when readings match the home’s pre-loss baseline, not when the surface feels dry to the touch. This is the most common mistake we fix from other restorers: walls closed too soon and mold appearing months later. Call (559) 354-1680 and ask us to check your readings.
Yes. In many Selma alley-load garages, the driveway is tight and the car can’t be moved because water has already pooled around it. We use compact extractors and low-clearance drying equipment that works around a parked vehicle. For most garage jobs, we can leave the car where it is, extract water from the slab, and place air movers in the spaces around and under the vehicle. If the water is Category 2 from a burst pipe or sewer line, we contain the garage area with plastic sheeting before extraction starts so contaminants don’t spread into the house. Call (559) 354-1680 and describe the access; we’ll tell you exactly how we’d handle it.
Written by Rick Sumner, Owner at Tidemark Water Damage Fresno, serving Selma and the Central Valley since 2006.