Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateFast, Reliable Mold Remediation Across Selma
Mold remediation in Selma, CA typically runs $1,800 to $6,500 for a standard containment-and-removal job in a 1,200 to 1,800 square foot ranch home. Most jobs are completed in two to four days, and we can have a crew at your door within 24 hours of your call to (559) 354-1680. Selma’s older housing stock, hard well water, and winter Tule fog create mold problems that national franchises misunderstand. Our Mold Remediation team knows what’s behind these stucco walls because we’ve opened hundreds of them.
Why Tidemark Water Damage Fresno Is Selma’s Preferred Mold Remediation Company
Selma homeowners call us because we show up with a written price before any work starts, and we leave with photo proof of the clean-up. Rick Sumner built this team on a simple standard: explain before acting, protect what matters, and stand behind the work for a full year. That’s the 365-Day Done Right Promise. If the remediation is not done right, we make it right. No fine print.
We’ve worked in neighborhoods across Selma, from the older blocks near Rose Avenue Elementary to the ranch-home subdivisions off Floral Avenue and Nebraska Avenue. The homes here share common DNA: slab foundations, stucco exteriors, composition shingle roofs, and original galvanized plumbing that is now 50 to 70 years old. That plumbing is the source of most hidden mold we find. Our Selma customers call us because we know what to look for before we even open a wall.
Every technician who arrives in Selma is background-checked, uniformed, and credentialed through IICRC, RIA, or IFA. Shoe covers go on at the door. Drop cloths cover the floor before the first piece of equipment comes in. And the drying equipment is professional-grade: Dri-Eaz dehumidifiers, Phoenix air movers, and XPOWER HEPA scrubbers, so we’re not guessing at a hardware-store fan.
Restoration work we handle
Mold Removal Specialist in Selma
A Mold Removal Specialist in Selma is not just someone with a spray bottle. It’s a technician who knows how to set containment under negative air pressure, remove affected drywall and insulation without cross-contaminating the rest of your home, and dry the cavity to pre-loss moisture levels before any rebuild begins. In Selma’s 1950s to 1970s ranch homes, that specialist also needs to know what a corroded galvanized pipe looks like, because that’s the root cause underneath the mold in most cases we see.
Finding the Source First
We don’t remediate mold without finding the water that fed it. In Selma, that often means moisture mapping behind stucco. We use thermal imaging and penetrating moisture meters to read what’s happening inside wall cavities and under vinyl flooring. If readings spike behind a baseboard, we open that wall. If a slab foundation is holding moisture under the flooring, we say so before we ever touch a wall.
Containment and Removal
The work itself follows a strict sequence: HEPA air scrubbers run continuously to capture airborne spores, affected materials come out in sealed bags, and the cavity gets treated before drying equipment goes in. Mold removal in Selma usually runs $1,200 to $3,800 for a single-room job with contained removal and drying. Larger multi-room jobs climb from there, and you’ll see the written number before we start.
Black Mold Removal in Selma
Black Mold Removal in Selma is one of our most common calls, especially after a hidden pinhole leak has been weeping inside a wall for weeks or months. What Selma homeowners call “black mold” is usually Stachybotrys chartarum, and it does not just wipe off. It colonizes the paper face of drywall and the back side of baseboards. Removing it safely means cutting it out, not painting over it.
What Black Mold Needs to Grow
Black mold needs three things: an organic food source, temperatures above 40°F, and sustained moisture. Selma’s winter Tule fog keeps outdoor humidity near 100% for days at a time, and inside walls with a slow leak, that’s a perfect incubator. Summer heat above 100°F does not kill mold. It just dries the surface while the colony goes dormant in the wall cavity, ready to re-activate when humidity returns.
Safe Removal, Not a Cover-Up
We remove the affected drywall two feet beyond the visible colony line, treat the framing with an EPA-registered antimicrobial, and dry the cavity to below 16% moisture content before any rebuild. Black mold removal in Selma typically runs $2,500 to $6,500 depending on how far the colony has traveled. You’ll see the written number before we start, and the 365-Day Done Right Promise covers every inch of that work.
Trusted Brands We Service in Selma
Selma homes don’t have one plumbing brand. They have galvanized pipe from the Eisenhower and Kennedy eras, copper from the 1980s, PEX patches from the 2000s, and occasionally all three in the same wall. Our crews work with professional equipment from Dri-Eaz, XPOWER, and B-Air to dry and scrub the cavities after any of those systems fail. We stock the sealants, tapes, and HEPA filters these machines need, so we’re not waiting on parts when your wall is open. Fast turnaround for Selma customers is standard, not an upgrade.
Common Mold Remediation Problems We See in Selma Homes
- Hidden pinhole leaks in galvanized plumbing. Selma’s hard well water corrodes the inside of 1950s to 1970s galvanized pipes from within. The leak stays inside the wall, feeding mold for weeks before you ever see a stain.
- Winter Tule fog re-humidifying drying cavities. Air movers alone cannot dry a Selma wall cavity in January when outdoor humidity sits at 90% or higher. Dehumidifiers must run in tandem, or the mold recolonizes within days.
- Trapped moisture under vinyl flooring on slab foundations. Older Selma ranch homes have concrete slabs with no vapor barrier. Moisture wicks up through the slab, gets trapped under vinyl plank or sheet flooring, and black mold grows in the dark for months.
- Roof leaks from aging composition shingle roofs. Selma’s 1950s and 1960s homes are on their second or third roof, and failing flashing around vents and valleys sends water into attic spaces and top plates, where mold grows unnoticed for seasons.
See the difference
Before
After
Before
After
Before
AfterPricing for Mold Remediation in Selma, CA
We Also Serve Cities Near Selma
We work across the southeastern San Joaquin Valley, so if you live in Fowler, Parlier, Kingsburg, or Reedley, the same crew and the same 365-Day Done Right Promise cover you. Same phone, same written-price-first standard. Dispatch and scheduling are coordinated from our Fresno, Central Valley office, but the crews live and work in this corridor every week.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Selma
Because the moisture source was never eliminated. In Selma’s older ranch homes, a remodel that covers over water-damaged framing without fixing the corroded galvanized pipe or the failed slab vapor barrier will smell musty again within a season. The mold’s water supply is still there. We find and stop the source before we close the wall, not after. Call (559) 354-1680 to schedule a moisture assessment.
We don’t dry with outdoor air. We seal the affected space with containment, then run professional dehumidifiers from Dri-Eaz and B-Air that extract moisture from the indoor air and discharge warm, dry air back into the room. Air movers alone fail in Tule fog conditions. That’s exactly why our drying logs track grain-per-pound readings, not just temperature. Call us and we’ll explain the numbers before we start.
Yes, and that answer changes the whole scope. Plumbing leaks show moisture below windows and at baseboard level, while roof leaks show staining on ceilings and top plates. Our moisture mapping and thermal imaging isolate the source. In Selma homes with original galvanized plumbing, pinhole leaks are the leading contributor by far. We document the source with photos and written notes for your insurance file.
No. Most single-room and even two-room remediations do not require pack-out. We build containment with 6-mil poly sheeting and run HEPA air scrubbers under negative pressure, so the rest of your home stays clean while we work. Full pack-out is only needed when a colony has spread across connected living spaces or has contaminated soft goods throughout the house. You’ll know which one you have before any furniture moves.
Because the air outside is dry but the wall cavity is not. Selma’s July heat above 100°F accelerates evaporation, which pulls moisture from a pinhole leak or slab wicking into the wall cavity faster. The heat then cooks that moisture into the framing and drywall, creating an ideal incubator. The outside air is dry. The inside of your wall is not. That’s why summer is actually one of our busiest months for mold discovery in Selma.
Call Tidemark Water Damage Fresno for Mold Remediation in Selma
If you smell something in your Selma home that should not be there, or you’ve seen a water stain that’s grown over the last few months, call (559) 354-1680. A live person answers. We’ll schedule a moisture assessment, give you a written price before anything is touched, and send a background-checked, IICRC-credentialed crew with shoe covers and drop cloths already on the truck. Rick Sumner and the team stand behind the work with a 365-Day Done Right Promise. That’s the standard. It’s the only one we work to.
Written by Rick Sumner, Owner at Tidemark Water Damage Fresno, serving Selma and the Central Valley.